Connecting To A Camera - Canon EOS 2000D Instruction Manual

Connecting to a Camera

Register the target camera to connect to wirelessly. The camera can be
connected to only one camera at a time.
48
Select [Wi-Fi function].
1
Under the [53] tab, set [Wi-Fi/NFC]

to [Enable], then select [Wi-Fi
function] (p.17).
If a screen for setting a nickname (for

identification) appears, register a
nickname (p.14).
Select [z].
2
Select [z] (Transfer images

between cameras) and press <0>.

The camera's <k> lamp will blink.
Set up the target camera.
3
When the screen on the left is

displayed on the camera, set up the
connection on the target camera as
well. For the operation procedure,
refer to the instruction manual of the
target camera.

When a connection is established, an
image on the card is displayed.
 The camera's <k> lamp will light up
in green.