Canon EOS 2000D Instruction Manual page 100

Connecting to a Detected Network Manually
(1)
(1) SSID
(2) An icon is displayed if the access point is encrypted
(3) Channel used
[Refresh] and [Manual settings]
Scroll down the screen in step 4 to display [Refresh] and [Manual

settings].
To search for access points again, select [Refresh].

To configure settings for the access point manually, select [Manual

settings]. Enter the SSID using the virtual keyboard and then
configure settings following the instructions displayed.
100
Select an access point.
4
(2) (3)

Press the <W> <X> keys to select
the access point to connect to from
the list of access points, then press
<0>.