Delayed Start; End Of Cooking; Keep Warm Function - TEFAL VC502D Manual

DELAYED START
• Select a cooking program with the "Mode" touchpad or set up the time manually with the +/-
touchpads before scheduling the delayed start.
• Press the touchpad - fig. 28. The symbol
• Select the delayed start time using the +/- touchpads - fig. 29. You can increase it by 15 minute
intervals and then by the hour.
• Press and the delayed start timer will begin to count down. The appliance will automatically
start the cooking cycle when the delayed start timer reaches 00.
To change the delayed start time, press for a long time the
mentioned above to set the delayed start timer.
Warning : make sure the tank is sufficiently filled with water.
DEFROSTING
• Make sure the tank is full of water before starting the program.
• Select program P6 by pressing the Mode touchpad until P6 is displayed on the screen.
• Press to launch the program
• The preset time is 10 minutes. You can adjust this timing using the +/- touchpads.
KEEP WARM FUNCTION
• Make sure the tank is full of water before starting the program.
• To activate the « Keep warm » function, select program P8
until P8 is displayed on the screen.
• Press to launch the program. The symbol
• The preset time is 30 minutes. You can adjust this timing using the +/- touchpads.
REHEATING
• Make sure the tank is full of water before starting the program.
• You can reheat food by selecting P7 program
displayed on the screen.
• Press to launch the program.
• The preset time is 10 minutes. You can adjust this timing using the +/- touchpads.
10
flashes on the screen.
touchpad. Repeat the steps
by pressing the Mode touchpad
appears on the screen.
by pressing the Mode touchpad until P7 is
END OF COOKING
• Once cooking is completed, the appliance stops automatically.
• The timer beeps and 00 is displayed on the screen - fig. 17.
• To voluntarily stop the appliance, press
• Check the food.
• If the food is not ready yet, make sure the water tank is full of water and restart the cooking.
• Remove the lid by the handle - fig. 18.
• Remove the bowls using the handles - fig. 19.
• Use oven gloves to handle the lid, the bowls, the rice bowl and the juice collector.
• Serve the food.
• Unplug the appliance - fig. 20.
• Let the appliance cool down for 20 minutes and check that the juice collector is cold enough
before removing it.
• WARNING! Carry the lid carefully when you lift it. The steam condensation causes the
formation of water droplets - fig. 18.
Download the recipe book
for a long time.
EN
11