Brother MFC-J5335DW Service Manual page 80

■ Error Code 8110
The paper size and paper type of each paper tray set during print setting are
different from before printing. This error occurs when the paper tray #1 has been
specified as a pickup tray with the highest priority and plain paper has been
specified as the paper type in auto tray switching print.
Error Code 8111
The paper size and paper type of each paper tray set during print setting are
different from before printing. This error occurs when the MP tray has been
specified as a pickup tray with the highest priority and plain paper has been
specified as the paper type in auto tray switching print.
Error Code 8112
The paper size and paper type of each paper tray set during print setting are
different from before printing. This error occurs when the paper tray #1 has been
specified as a pickup tray with the highest priority and inkjet paper has been
specified as the paper type in auto tray switching print.
Error Code 8113
The paper size and paper type of each paper tray set during print setting are
different from before printing. This error occurs when the MP tray has been
specified as a pickup tray with the highest priority and inkjet paper has been
specified as the paper type in auto tray switching print.
Error Code 8114
The paper size and paper type of each paper tray set during print setting are
different from before printing. This error occurs when the paper tray #1 has been
specified as a pickup tray with the highest priority and Glossy paper has been
specified as the paper type in auto tray switching print.
Error Code 8115
The paper size and paper type of each paper tray set during print setting are
different from before printing. This error occurs when the MP tray has been
specified as a pickup tray with the highest priority and Glossy paper has been
specified as the paper type in auto tray switching print.
< User Check >
- Check that the paper size in the paper tray is the same as the paper size in the print
setting.
Step
1 Main PCB defective
Cause
Replace the main PCB.
2-44
Solution
Confidential