Carriage Motor - Brother MFC-J5335DW Service Manual

9.44 Carriage Motor

(1) Release the Boss and remove the Tube protector from the CR frame ASSY.
CR frame ASSY
(2) Release the wiring of the Carriage motor harness.
(3) Release all the wiring of the Lower side cover and Maintenance unit.
(4) Remove the two screws (TAPTITE CUP B M3x10) and remove the Lower side
cover from the Main body.
Note: When removing the Lower side cover, be careful not to pull it too much.
(5) Remove the Ferrite core on to the Carriage motor harness from the Lower side
cover.
TAPTITE CUP B M3x10
Maintenance unit
Boss
Hooks
Fig. 3-119
Lower side cover
Fig. 3-120
3-102
Tube protector
Hook
Carriage motor harness
Ferrite core
TAPTITE CUP B M3x10
Tube protector
Boss
CR frame ASSY
Lower side cover
Main body
Confidential