Table of Contents
Advertisement
U
You can access and manage the Internet Camera through: 1) a
web browser, and 2) the enclosed software IPView Pro. This
chapter describes the Web Configuration Utility, and provides the
instructions on using the camera with a web browser.
Web Configuration Utility
The Internet Camera must be configured through its built-in Web-
based Configuration. (Extensive knowledge of LAN will be helpful
in setting up the Internet Camera.)
From the web browser, enter the default IP address 192.168.0.30
in the Address bar and then press [Enter] to access the Welcome
screen of the Configuration Utility. The Welcome screen is
shown on the next page.
NOTE: The computer's IP address must be in the same subnet as the
camera in order for the two devices to communicate.
SING THE
C
34
7
AMERA
Advertisement
Table of Contents
