Configuration Program - TRENDnet TWG-BRF114 User Manual

Trendnet twg-brf114: user guide
Hide thumbs Also See for TWG-BRF114:
Table of Contents

Advertisement

Configuration Program

The Broadband Router contains an HTTP server. This enables you to connect to it, and configure it, using your Web Browser. Your
Browser must support JavaScript.
The configuration program has been tested on the following browsers:
Netscape V4.08 or later
Internet Explorer V4 or later
Preparation
Before attempting to configure the Broadband Router, please ensure that:
Your PC can establish a physical connection to the Broadband Router. The PC and the Broadband Router must be directly con-
nected (using the Hub ports on the Broadband Router) or on the same LAN segment.
The Broadband Router must be installed and powered ON.
If the Broadband Router's default IP Address (192.168.0.1) is already used by another device, the other device must be turned
OFF until the Broadband Router is allocated a new IP Address during configuration.
Using UPnP
If your Windows system supports UPnP, an icon for the Broadband Router will appear in the system tray, notifying you that a new
network device has been found, and offering to create a new desktop shortcut to the newly-discovered device.
Unless you intend to change the IP Address of the Broadband Router, you can accept the desktop shortcut.
Whether you accept the desktop shortcut or not, you can always find UPnP devices in My Network Places (previously called
Network Neighborhood).
Double - click the icon for the Broadband Router (either on the Desktop, or in My Network Places) to start the configuration.
Refer to the following section Setup Wizard for details of the initial configuration process.
Using your Web Browser
To establish a connection from your PC to the Broadband Router:
1. After installing the Broadband Router in your LAN, start your PC. If your PC is already running, restart it.
2. Start your WEB browser.
3. In the Address box, enter "HTTP://" and the IP Address of the Broadband Router, as in this example, which uses the Broadband
Router's default IP Address:
HTTP://192.168.0.1
Setup
9

Advertisement

Table of Contents
loading

Table of Contents