Table of Contents
Advertisement
Logs
The Logs record various types of activity on the Broadband Router This data is useful for troubleshooting, but enabling all logs will
generate a large amount of data and adversely affect performance.
Since only a limited amount of log data can be stored in the Broadband Router, log data can also be E-mailed to your PC.
Data - Logs Screen
Enable Logs
Outgoing
Connections
Access Control
DoS Attacks
Timezone
View Log Button
Clear Log Button
E-Mail Alerts
Send E-mail alert..
If selected, Outgoing Internet connections are logged. Normally,
the (Internet) "Destination" will be shown as an IP address. But if
the "URL Filter" is enabled, the "Destination" will be shown as a
URL.
If enabled, the log will include attempted outgoing connections
which have been blocked by the "Access Control" feature.
If enabled, this log will show details of DoS (Denial of Service)
attacks which have been blocked by the built-in Firewall.
Select the correct Timezone for your location. This is required for
the date/time shown on the logs to be correct.
Use this to view each log, as required.
Use this to restart the required log. This makes it easier to read
the latest entries.
If enabled, an E-mail will be sent immediately if a DoS (Denial of
Service) attack is detected. If enabled, the E-mail address infor-
mation (below) must be provided.
Figure 40: Logs Screen
Advanced Administration
67
Advertisement
Table of Contents
