Table of Contents
Advertisement
Broadband Router User Guide
Connection Details - SingTel RAS
If using the SingTel RAS access method, a screen like the following example will be displayed when the "Connection Details" button
is clicked.
Data - RAS Screen
Internet
RAS Plan
The RAS Plan which is currently used.
Physical Address
The hardware address of this device, as seen by remote devices on
the Internet. (This is different to the hardware address seen by
devices on the local LAN.)
IP Address
The IP Address of this device, as seen by Internet users. This address
is allocated by your ISP (Internet Service Provider).
Network Mask
The Network Mask associated with the IP Address above.
Default Gateway
The IP Address of the remote Gateway or Router associated with the
IP Address above.
The IP Address of the Domain Name Server which is currently used.
DNS IP Address
DHCP Client
This will show "Enabled" or "Disabled", depending on whether or
not this device is functioning as a DHCP client.
If "Enabled" the "Remaining lease time" field indicates when the IP
Address allocated by the DHCP Server will expire. The lease is
automatically renewed on expiry; use the "Renew" button if you wish
to manually renew the lease immediately.
Buttons
This button is only useful if the IP address shown above is allocated
Release/Renew
automatically on connection. (Dynamic IP address). If you have a
Button will display
Fixed (Static) IP address, this button has no effect.
EITHER
•
"Release"
OR
"Renew"
Figure 27: Connection Details - RAS
If the ISP's DHCP Server has NOT allocated an IP Address for
the Broadband Router, this button will say "Renew". Clicking
the "Renew" button will attempt to re-establish the connection
and obtain an IP Address from the ISP's DHCP Server.
42
Advertisement
Table of Contents
