Table of Contents
Advertisement
Assembly
Removing the Mower
1.
Park the machine on a level surface, disengage
the power take off (PTO), set the parking brake,
and turn the ignition key to "OFF" to stop the
engine. Remove the key.
2.
Remove the two wing nuts and belt cover from
the tractor (Fig. 13).
2
Figure 13
1. Belt cover
3.
Turn knob on idler assembly clockwise to loosen
belt. Remove belt from upper mower pulley
(Fig. 14).
2
Figure 14
1. Knob
8
2
1
m–2534
2. Wing nut
1
m–2823
2. Upper mower pulley
4.
Remove hairpin cotters from trunnion and
bottom of yoke (Fig. 15).
5.
Unlatch and remove locking clevis pin that
secures yoke assembly to clutch shaft. Pivot
yoke out and forward to remove from clutch
shaft and engagement plate (Fig. 15).
6.
Remove belt from pulley (Fig. 15).
7.
Assemble yoke and engagement plate and attach
locking clevis pin, trunnion and hairpin cotters
to secure (Fig. 15).
1
2
5
4
Figure 15
1. Hairpin cotter
2. Trunnion
3. Engagement plate
4. Locking clevis pin
8.
Open front hitch and remove pulley assembly
(Fig. 16).
3
7
6
1
m–2691
5. Yoke
6. Clutch shaft
7. Inside groove
Advertisement
Table of Contents
