Table of Contents
Advertisement
7.
Rotate front mounting shaft so fork faces up and
align so spacers are between mid-mount hitch
plates (Fig. 5).
8.
Lift mower with attachment lift and guide fork
to capture hitch rod (Fig. 5). Close mid-mount
hitch lock handle.
5
4
Figure 5
1. Front mounting shaft
2. Fork
3. Spacer
9.
Remove the two wing nuts and belt cover from
the tractor (Fig. 6).
2
Figure 6
1. Belt cover
1
2
3
3
m–2825
4. Mid-mount hitch plate
5. Hitch rod
2
1
m–2534
2. Wing nut
10. Remove hairpin cotters from trunnion and
bottom of yoke (Fig. 7).
11. Unlatch and remove locking clevis pin that
secures yoke assembly to clutch shaft. Pivot
yoke out and forward to remove from clutch
shaft and engagement plate (Fig. 7).
12. Place belt in inside pulley groove (Fig. 7).
13. Assemble yoke and engagement plate and attach
locking clevis pin, trunnion and hairpin cotters
to secure (Fig. 7).
1
2
5
4
Figure 7
1. Hairpin cotter
2. Trunnion
3. Engagement plate
4. Locking clevis pin
14. Place pulley assembly into front hitch and lock
by moving latch rearward (Fig. 8).
Assembly
3
7
6
1
m–2691
5. Yoke
6. Clutch shaft
7. Inside groove
5
Advertisement
Table of Contents
