Panasonic FZ-M1 Series Operating Instructions - Reference Manual page 5

(Depending on the language preference, some screen messages in these instructions are different from the actual screen messages. For example,
[Flight mode] may be displayed instead of [Airplane mode] in some language preference)
Displaying Apps
1. Touch (All apps).
Alternatively, touch
Opening the Control Panel
On the Start screen, proceed as follows.
1. Touch (All apps) - [Windows System] - [Control Panel].
Alternatively, touch
Opening the "Settings" screen
1. Touch (Settings).
Alternatively, touch
Opening the Panasonic PC Settings Utility
On the Start screen, proceed as follows.
1. Touch
(Panasonic PC Settings Utility).
Alternatively, touch
Notification area
The notification area is on the right side of the screen.
To display the notification, touch
Latest Information on Windows 10
When Windows 10 is updated, the screen display or operation procedures may be changed.
For the latest information on Windows 10, see the following web page.
https://pc-dl.panasonic.co.jp/itn/addendum/
Sound and Video
Sound (e.g. MP3, WMA) and video (e.g. MPG, WMV) recorded in microSD Memory Card may be interrupted during playback. If this
happens, copy them to the flash memory drive and play back.
Depending on the processing status on Windows, sound may be interrupted at Windows startup. You can mute the sound at startup.
The startup sound is muted as the factory default.
1. Touch and hold
2. Remove the check mark from [Play Windows Startup sound], and touch [OK].
When high-frequency sound occurs
If high-frequency sound occurs while using the computer, check the settings for the USB power saving function.
(Start) at the bottom left corner in the desktop mode.
(Start) - [Windows System] - [Control Panel] in the desktop mode.
(Start) - (Settings) in the desktop mode.
(Start) - (Panasonic PC Settings Utility) in the desktop mode.
(Notification) on the task tray.
(Speaker) on the task tray, and touch [Sounds].
- 5 -