Wireless Wan; Inserting/Removing A Sim Card - Panasonic FZ-M1 Series Operating Instructions - Reference Manual

Hide thumbs Also See for FZ-M1 Series:
Table of Contents

Advertisement

Wireless WAN

<Only for model with wireless WAN>
This computer is equipped with the Wireless WAN enabling you to communicate using radio frequencies.
N O T E
Communication is established through the Wireless WAN antenna (A). Do not block the antenna area with your hand or body.
n
To use wireless WAN, set
n
If "Device driver software was not installed correctly." (or a similar message) appears when starting the computer or resuming from
n
sleep or hibernation.
When communication works normally, Wireless WAN is operating correctly.
If communication fails, the device may not be recognized correctly. In this case, restart the computer.
Do not use the microSIM card adapter.
n
Do not insert microSIM cards on which labels or stickers are affixed. Failure to obey may result in malfunction.
n

Inserting/Removing a SIM Card

Before using the Wireless WAN, set a SIM card to the SIM card slot.
Be sure to turn off the computer before inserting or removing the SIM card.
n
To insert a SIM card
1. Turn off the computer and disconnect the AC adaptor.
2. Turn over the computer
Make sure no foreign objects are under the computer.
3. Remove the battery pack (
4. Open the cover (A).
Do not open the cover by using the dedicated pen (optional). The dedicated pen may be destroyed.
[Wireless WAN]
of [Wireless Configuration] to [Enabled] (default) in the [Advanced] menu of the Setup Utility.
C AU TI O N
Replacing the Battery
Pack).
-
45
-

Advertisement

Table of Contents
loading

Table of Contents