Advertisement
1. Raise assembled Door Frame up and insert first
Roller (53) of Door Slider (31) onto Door Rail (14).
Align first Bottom Door Slider (40) over edge of
Front Floor Plate (17). Slide door over and align
next top Roller and bottom Slider as just done.
2. Once door is installed, install Bolt (43) and Nut (52)
into hole on each side of Door Rail (14) to prevent
door from sliding off rail. Attach Right and Left
Rail End Caps (49,50) onto Door Rail ends.
Item 47712
For technical questions, please call 1-888-866-5797.
3. Slide top edge of Top Window Frame (33) of
Fully Assembled Window into slot at top of
Crown (35). Window Brace (55) should be
aligned with Window Stops (48) on bottom
of Window Support Beams (15). Slide
Window into place over one Window Support
Beam (15) and gradually lower into place.
4. Loosen Nuts (52) holding
Window Support Beams (15) in place and
slide Window Support Beams (15) up to
touch Windows. Secure in place.
Page 15
Advertisement
