Table of Contents
Advertisement
Y92F-74 Flush Mounting Adapter (Order Separately)
Note: A Front Cover and Flush Mounting Adapter cannot be used at the
same time.
Dimensions with Front Connecting Socket
P2CF-08-@/P2CF-11-@
H3CR-F
H3CR-FN
103.2*
P2CF-11
P2CF-11-E
* These dimensions vary with the kind of DIN track (reference value).
■ Accessories (Order Separately)
Protective Cover
Y92A-48B
To use the Protective Cover with a flush mounting, use the Y92F-30
flush mounting adaptor.
This Protective Cover cannot be used together with the Y92F-73/-74
flush mounting adaptor or the panel cover.
ALL DIMENSIONS SHOWN ARE IN MILLIMETERS.
To convert millimeters into inches, multiply by 0.03937. To convert grams into ounces, multiply by 0.03527.
32
58
45
±0.2
H3CR-F8
H3CR-F8N
92.3*
100.9
*
2.3
P2CF-08
P2CF-08-E
In the interest of product improvement, specifications are subject to change without notice.
Panel
56
68
43
±0.2
+0.2
50
0
Note: The applicable thickness of the mounting panel must be
1 to 3.2 mm.
Dimensions with Back Connecting Socket
P3G-08/P3GA-11
81.5
17.4
80
90.0
H3CR-F
H3CR-FN
+
Adapter
P3GA-11
Y92F-30
(When
*
Y92A-48G
2.3
mounted)
Note: There are no restrictions to the mounting direction.
Hold-down Clip
Y92H-8
The Y92H-8 Hold-down Clip is attached to the PF085A socket.
Hold-down Clip
Y92H-7
Y92H-7 Hold-down Clip is attached with screws together with the
PL08 socket or the PL11 socket.
P3G
Back Connecting Socket
0.5 R max.
+0.5
55
-0
52.3
81.5
17.4
75
H3CR-F8
H3CR-F8N
+
Adapter
P3G-08
Y92F-30
(When
Y92A-48G
mounted)
H3CR-F
+0.5
45
-0
Advertisement
Table of Contents
