Model Number Structure; Ordering Information - Omron H3CR-AS Manual

Solid-state Twin Timers
H3CR-F
DIN 48  48-mm Twin Timers
• Wide power supply ranges of High Voltage 100 to 240 VAC/100
to 125 VDC and Low Voltage 24 to 48 VAC/12 to 48 VDC.
• ON- and OFF-times can be set independently and so
combinations of long ON- or OFF-time and short OFF- or ON-
time settings are possible.
• Twenty-four time ranges from 0.05 s to 300 h depending on the
model to be used.
• Models with a flicker ON start or flicker OFF start are available.
• Easy sequence checks through instantaneous outputs for a
zero set value at any time range.
• Length, when panel-mounted with a Socket, of 80 mm or less.
• 11-pin and 8-pin models are available.

Model Number Structure

■ Model Number Legend
H3CR - F @ @ - @ @
1 2 3 4 5
1. Classification 3. Twin Timer Mode
F: Twin timers
None: Flicker OFF start
N:
2. Configuration
4. Time Range
None: 11-pin socket
8: 8-pin socket
None: 0.05 s to 300 h models

Ordering Information

■ List of Models
Operating modes
Flicker OFF start 100 to 240 VAC/100 to 125 VDC
24 to 48 VAC/12 to 48 VDC
Flicker ON start 100 to 240 VAC/100 to 125 VDC
24 to 48 VAC/12 to 48 VDC
Note: Specify both the model number and supply voltage when ordering.
Example: H3CR-F 100-240AC/100-125DC
Flicker ON start
Supply voltage
H3CR-F 100-240AC/100-125DC
H3CR-F 24-48AC/12-48DC
H3CR-FN 100-240AC/100-125DC
H3CR-FN 24-48AC/12-48DC
Supply voltage
For the most recent information on models that have been
certified for safety standards, refer to your OMRON website.
5. Supply Voltage
100-240AC/100-125DC: 100 to 240 VAC/100 to 125 VDC
24-48AC/12-48DC: 24 to 48 VAC/12 to 48 VDC
0.05 s to 300 h models
11-pin models
CSM_H3CR-F_DS_E_1_7
8-pin models
H3CR-F8 100-240AC/100-125DC
H3CR-F8 24-48AC/12-48DC
H3CR-F8N 100-240AC/100-125DC
H3CR-F8N 24-48AC/12-48DC
25