Important Headset Safety Information; Cisco Headset 500 Series - Cisco 7800 Series User Manual

CISCO 7800 SERIES
audio accessories, see
http://www.cisco.com/c/en/us/products/unified-communications/uc_endpoints_accessories.html..

Important Headset Safety Information

High Sound Pressure—Avoid listening to high volume levels for long periods to prevent
possible hearing damage.
When you plug in your headset, lower the volume of the headset speaker before you put the headset on. If
you remember to lower the volume before you take the headset off, the volume will start lower when you
plug in your headset again.
Be aware of your surroundings. When you use your headset, it may block out important external sounds,
particularly in emergencies or in noisy environments. Don't use the headset while driving. Don't leave your
headset or headset cables in an area where people or pets can trip over them. Always supervise children who
are near your headset or headset cables.

Cisco Headset 500 Series

The following Cisco headsets are available:
• Cisco Headset 531—A headset with a single earpiece that can be used as either a standard headset or a
USB headset with the USB adapter.
• Cisco Headset 532—A standard headset with a dual earpiece that can be used as either a standard headset
or a USB headset with the USB adapter.
• Cisco Headset 561—A wireless headset with a single earpiece that comes with a base.
• Cisco Headset 562—A wireless headset with a dual earpiece that comes with a base.
Cisco Headset 531 and 532
The Cisco Headset 531 and 532 can be used as standard headsets on the phones. You plug the headset into
the headset port using the RJ connector.
Phone Firmware Release 12.1(1) and later is required for the headsets to function properly.
Figure 4: Cisco Headset 531
GoMomentum.com 61
USER GUIDE
888.538.3960