Calls; Audio Path Selection - Cisco 7800 Series User Manual

CISCO 7800 SERIES
2
C H A P T E R

Calls

• Audio Path Selection, on page 17
• Make Calls, on page 18
• Answer Calls, on page 21
• Mute Your Call, on page 25
• Hold Calls, on page 26
• Forward Calls, on page 29
• Transfer Calls, on page 29
• Conference Calls and Meetings, on page 30
• Intercom Calls, on page 32
• Supervise and Record Calls, on page 33
• Prioritized Calls, on page 34
• Multiple Lines, on page 36
• Phone Calls with Mobile Connect, on page 38

Audio Path Selection

When you make or receive a call, the audio path goes to the last device used by you, either the handset, the
headset, or the speakerphone. The following list describes each scenario:
• Pick up the handset when you make or answer a call, and all of your calls are routed to your handset until
you select Headset or Speakerphone
• Select Headset when you make or answer a call, and all of your calls are routed to your headset
until you pick up the handset or select Speakerphone
If your administrator sets your headset as the audio path on your phone, then you can remove the handset
and use your headset. This is ideal for anyone who prefers the convenience of a headset. But you must
still select Headset the first time you handle a call.
• Select Speakerphone
speakerphone until you pick up the handset or select Headset
GoMomentum.com
.
when you make or answer a call, and all of your calls are routed to your
17
.
.
USER GUIDE
888.538.3960