Table of Contents
Advertisement
322 Maintenance and care
Slowly turn cap
1
counter-clockwise to
#
release overpressure.
Continue turning cap
1
counter-clockwise
#
and remove it.
The coolant level is correct in the following cases:
If the engine is cold, the coolant is up to
R
marker bar 2.
If the engine is warm, the coolant is up to
R
0.6 in (1.5 cm) over the marker bar 2.
If necessary, refill with coolant that has been
#
approved for Mercedes-Benz.
%
Further information on coolant (
Filling the windshield washer system
& WARNING Risk of burns from hot compo-
nent parts in the engine compartment
Certain component parts in the engine com-
partment can be very hot, e.g. the engine, the
cooler and parts of the exhaust system.
Allow the engine to cool down and only
#
touch component parts described in the
following.
& WARNING ‑ Risk of fire and injury from
windshield washer concentrate
Windshield washer concentrate is highly flam-
mable. It could ignite if it comes into contact
with hot engine component parts or the
exhaust system.
Make sure that no windshield washer
#
concentrate spills out next to the filler
opening.
page 384).
/
Turn cap
1
counter-clockwise and remove it.
#
Add washer fluid.
#
1
Replace cap
and turn it clockwise until it
#
engages.
Advertisement
Table of Contents
