Table of Contents
Advertisement
Turn signals
To indicate briefly: push the combination
#
switch briefly to the point of resistance in the
direction of arrow
2
or 4.
The corresponding turn signal light will flash
three times.
To indicate permanently: push the combina-
#
tion switch beyond the point of resistance in
the direction of arrow
2
or 4.
Activating/deactivating the hazard warning lights
Press button 1.
#
The hazard warning lights will switch on automati-
cally if:
the air bag has been deployed.
R
Light and visibility 109
Adaptive Highbeam Assist
▌Adaptive Highbeam Assist function
& WARNING Risk of accident despite Adap-
tive Highbeam Assist
Adaptive Highbeam Assist does not react to:
Road users without lights, e.g. pedestrians
R
Road users with poor lighting, e.g. cyclists
R
Road users whose lighting is obstructed,
R
e.g. by a barrier
On very rare occasions, Adaptive Highbeam
Assist may fail to recognize other road users
with their own lighting, or may recognize them
too late.
In these, or in similar situations, the automatic
high beam will not be deactivated or will be
activated despite the presence of other road
users.
Always observe the road and traffic con-
#
ditions carefully and switch off the high
beam in good time.
Advertisement
Table of Contents
