Scsi Controller Enabled/Disabled; Scsi Termination Enabled/Dsiabled - Supermicro X7DBX-8 User Manual

SCSI Controller Enable/
Disable (*X7DBX-8)
Jumper JPA1 is used to enable or dis-
able the SCSI controller. The default set-
ting is on pins 1-2 to enable SCSI. See
the table on the right for jumper settings.
SCSI Termination Enable/
Disable (*X7DBX-8)
Jumpers JPA2/JPA3 are used to enable
or disable termination for SCSI Channel
A (JPA2) and Channel B (JPA3) con-
nectors. The default setting is open to
enable termination. See the table on the
right for jumper settings.
*Note: In order for the SCSI drives to
function properly, please do not change
the default setting (*Open) set by the
manufacturer.
LAN1
LAN2
SIM1U IPMI
PCI-X 100MHz ZCR
PCI-X 133MHz
Chan. A SCSI
C
B
A
SBX-E2 X4
SBX-E1 X8
BIOS
2-23
Chapter 2: Installation
VGA Enable/Disable
Jumper Settings (JPG1)
Jumper Setting Defi nition
Pins 1-2 Enabled
Pins 2-3 Disabled
SCSI Term. Enable/Disable
Jumper Settings
Jumper Setting Defi nition
Open (*default) Enabled
Closed Disabled
A. SCSI Enable
FP CTRL
B. SCSI Channel A Termi-
nation Enable
C. SCSI Channel B Termi-
CPU1
nation Enable
CPU2