Table of Contents
Advertisement
Appendix D: The Adaptec HostRAID Setup Guidelines
To format a disk:
*Note: The operation of Formatting Disk allows you to perform a low-level
formatting of a hard drive by writing zeros to the entire disk. Serial ATA drives
are low-level formatted at the factory and do not need to be low-level formatted
again.
3 When the screen shown below displays, select Format Disk and press <En-
ter>. The following screen appears:
4 Read the warning message when it appears in the screen as shown below. To
continue with disk formatting, select Yes and hit <Enter>. Otherwise, select No
and press <Enter>.
Caution
(*
: Formatting a disk destroys all data on the drive. Be sure to back up
your data before formatting a disk.)
D-17
Advertisement
Table of Contents
