Table of Contents
Advertisement
Appendix D: The Adaptec HostRAID Setup Guidelines
Confi guring Disk Drives
You may need to confi gure a disk drive before you can use it.
Caution: Confi guring a disk may overwrite the partition table on the disk and
may make any data on the disk inaccessible. If the drive is used in an array, you
may not be able to use the array again.
Do not confi gure a disk that is part of a boot array. To determine which disks
are associated with a particular array, please refer to
Viewing Array Properties.
To confi gure a disk drive:
1. From the main menu (shown on Page D-4), select Confi gure Drives and hit
<Enter> (as shown below.)
D-5
Advertisement
Table of Contents
