Troubleshooting; Checkpoints - Samsung WD80J6A10AW User Manual

Troubleshooting

Checkpoints

If you encounter a problem with the washing machine, first check the table below and try the
suggestions.
Problem
Does not start.
Water supply is
insufficient, or no
water is supplied.
After a cycle,
detergent remains in
the detergent drawer.
48 English
WD80J6A10AW_DC68-03628L_EN.indd 48
• Make sure the washing machine is plugged in.
• Make sure the door is properly closed.
• Make sure the water taps are open.
• Make sure to press or tap Start/Pause to start the washing
machine.
• Make sure Child Lock is not activated.
• Before the washing machine starts to fill, it will make a series
of clicking noises to check the door lock and does a quick
drain.
• Check the fuse or reset the circuit breaker.
• Fully open the water tap.
• Make sure the door is properly closed.
• Make sure the water supply hose is not frozen.
• Make sure the water supply hose is not kinked or clogged.
• Make sure there is sufficient water pressure.
• Make sure the washing machine is running with sufficient
water pressure.
• Make sure the detergent is added to the centre of the
detergent drawer.
• Make sure the rinse cap is inserted properly.
• If using granular detergent, make sure the detergent selector
is in the upper position.
• Remove the rinse cap and clean the detergent drawer.
Action
2017/12/5 17:17:13