Information Codes - Samsung WD80J6A10AW User Manual

Information codes

If the washing machine fails to operate, you may see an information code on the screen.
Check the table below and try the suggestions.
Problem
4C
4C2
5C
DC
OC
WD80J6A10AW_DC68-03628L_EN.indd 53
Water is not supplied.
• Make sure the water taps are open.
• Make sure the water hoses are not clogged.
• Make sure the water taps are not frozen.
• Make sure the washing machine is operating with sufficient
water pressure.
• Make sure that the cold water tap and the hot water tap are
properly connected.
• Clean the mesh filter as it may be clogged.
NOTE
When the washer displays the "4C" code, the washer do
draining for 3 minutes. During this time, the Power button is
inoperative.
• Make sure the cold water supply hose is firmly connected to
the cold water tap.
If it is connected to the hot water tap, the laundry may be
deformed with some cycles.
Water is not draining.
• Make sure the drain hose is not frozen or clogged.
• Make sure the drain hose is positioned correctly, depending
on the connection type.
• Clean the debris filter as it may be clogged.
• Make sure the drain hose is straightened all the way to the
drain system.
• If the information code remains, contact a customer service
centre.
Operating the washer with the door open.
• Make sure the door is properly closed.
• Make sure laundry is not caught in the door.
Water is overflowed.
• Restart after spinning.
• If the information code remains on the display, contact a local
Samsung service centre.
Action
English 53
2017/12/5 17:17:13