Table of Contents
Advertisement
13 CB500F-32MGZA000.book 96 ページ ２０１２年１１月２７日 火曜日 午後３時５７分
Tyre Puncture
Removing Wheels
u
2. Make sure that the slot on the brake
caliper bracket is positioned in the lug on
the swingarm.
Brake caliper bracket
Swingarm
96
3. Adjust the drive chain.
4. Tighten the rear axle nut.
Torque: 88 N·m (9.0 kgf·m, 65 lbf·ft).
Slot
5. Tighten the drive chain adjusting nuts
lightly, then hold the adjusting nuts and
tighten the lock nuts.
Torque: 21 N·m (2.1 kgf·m, 15 lbf·ft).
6. After installing the wheel, apply the brake
pedal several times, then recheck the
wheel rotates freely. Recheck the wheel if
the brake drags or if the wheel does not
rotate freely.
Lug
If a torque wrench was not used for
installation, see your dealer as soon as
possible to verify proper assembly.
Improper assembly may lead to loss of
braking capacity.
P. 74
2
Advertisement
Chapters
Table of Contents
