Honda CB 500F 2012 Manual page 70

13 CB500F-32MGZA000.book 67 ページ ２０１２年１１月２７日 火曜日 午後３時５７分
Oil filter
Rubber seal
7. Apply a thin coat of engine oil to the
rubber seal of a new oil filter.
8. Install a new oil filter and tighten.
Torque: 26 N·m (2.7 kgf·m, 19 lbf·ft).
Engine Oil Changing Engine Oil & Filter
u
9. Install a new sealing washer onto the
drain bolt. Tighten the drain bolt.
Torque: 30 N·m (3.1 kgf·m, 22 lbf·ft).
10. Fill the crankcase with the recommended
oil ( P. 50) and install the oil fill cap.
2
Required oil
When changing oil &
engine oil filter:
2.7 litres (2.9 US qt, 2.4 Imp qt)
When changing oil only:
2.5 litres (2.6 US qt, 2.2 Imp qt)
11. Check the oil level.
2
12. Check that there are no oil leaks.
P. 64
67