Honda CB 500F 2012 Manual page 98

13 CB500F-32MGZA000.book 95 ページ ２０１２年１１月２７日 火曜日 午後３時５７分
5. Remove the rear axle shaft, washer, brake
caliper bracket, rear wheel and side
collars.
Support the brake caliper assembly so
u
that it doesn't hang from the brake
hose. Do not twist the brake hose.
u Avoid getting grease, oil, or dirt on the
disc to pad surfaces.
u Do not push the brake pedal while the
wheel is removed.
Tyre Puncture
Installation
1. To install the rear wheel, reverse the
removal procedure.
Take care to prevent the brake caliper
u
from scratching the wheel during
installation.
NOTICE
When installing the brake caliper into position, carefully
fit the brake disc between the pads to avoid scratching
them.
Removing Wheels
u
continued 95