Honda CB 500F 2012 Manual page 95

13 CB500F-32MGZA000.book 92 ページ ２０１２年１１月２７日 火曜日 午後３時５７分
Tyre Puncture Removing Wheels
u
4. Loosen the axle pinch bolt and front axle
shaft.
5. Support your motorcycle securely and
raise the front wheel off the ground
using a maintenance stand or a hoist.
6. Remove the front axle shaft, front wheel
and side collars.
Side collar
Axle pinch bolt
92
Front axle shaft
Installation
1. Attach the side collars to the wheel.
2. On the left side, place the wheel
between the fork legs and insert the
front axle shaft to the end, through the
left fork leg and wheel hub.
3. Tighten the axle shaft.
Torque: 54 N·m (5.5 kgf·m, 40 lbf·ft).