Honda CB 500F 2012 Manual page 77

13 CB500F-32MGZA000.book 74 ページ ２０１２年１１月２７日 火曜日 午後３時５７分
Drive Chain Adjusting the Drive Chain Slack
u
Adjusting the Drive Chain Slack
Adjusting the chain requires special tools.
Have the drive chain slack adjusted by your
dealer.
(CB500FA only)
When adjusting the drive chain slack, be
careful not to damage the wheel speed
sensor and pulser ring.
1. Place your motorcycle on the side stand
on a level surface.
2. Stop the engine. Place the transmission in
Neutral.
3. Loosen the rear axle nut.
4. Loosen the lock nuts on both sides of the
swingarm.
74
Lock nut Rear axle nut
Adjusting nut
Adjusting nut Lock nut
Rear edge of
adjusting slot
Chain adjuster
index mark