Honda CB 500F 2012 Manual page 97

13 CB500F-32MGZA000.book 94 ページ ２０１２年１１月２７日 火曜日 午後３時５７分
Tyre Puncture Removing Wheels
u
❙
Rear Wheel
Removal
1. Support your motorcycle securely and
raise the rear wheel off the ground using
a maintenance stand or a hoist.
2. Loosen the rear axle nut, lock nuts and
turn the adjusting nuts so the rear wheel
can be moved all the way forward for
maximum drive chain slack.
3. Remove the drive chain from the rear
wheel sprocket by pushing the rear wheel
forward.
4. Remove the rear axle nut and washer.
94
Pulser ring Wheel speed sensor
(CB500FA only) (CB500FA only)
Lock nut
Adjusting nut
Rear axle shaft
Drive chain
Rear
axle nut
Washer
Lock nut
Adjusting nut
Washer