Fujitsu AUXG22KVLA Design & Technical Manual page 228

Exterior
Insulation
kit
4-2. Parts (for Indoor unit)
Part name Model name
Drain pump unit UTZ-PX1NBA
External
UTY-XWZXZG
connect kit
Air outlet shutter
UTR-YDZC
plate
Wide panel UTG-AKXA-W
Panel spacer UTG-BGYA-W
Fresh-air intake
UTZ-VXAA
kit
Insulation for
UTZ-KXGA
high humidity
Wireless LAN
UTY-TFSXZ1
adapter
Modbus
UTY-VMSX
converter
KNX converter UTY-VKSX
- 220 -
Summary
Optional drain lift up mechanism
allows more flexible installation.
Use to connect with various peripheral
devices and air conditioner PCB.
For control output port.
Installed at the air outlet when 3-
directions mode is performed.
Hides the gap between the ceiling hole
and the cassette grille.
If there is not enough height in the
ceiling space, by inserting this spacer
between the cassette grille and the
ceiling surface, the height of the unit
body goes into the ceiling space
become 50-mm lower.
By attaching Fresh-air intake kit to the
indoor unit, it can be taken in fresh air
of up to 10% of "high" air volume of
the indoor unit.
Install when the under-roof condition is
expected to be the humidity of over
80% and the temperature of over
30 °C.
Remotely manage an air conditioning
system using mobile devices such as
smartphones and tablets.
For connection indoor unit with UART
interface.
For connection between indoor unit
with UART interface and a Modbus
open network.
For connection between indoor unit
with UART interface and a KNX open
network.
4. Others