Fujitsu AUXG22KVLA Design & Technical Manual page 178

7. Press the
/
ted from the indoor unit or the IR receiver when the signal is received correctly. If wrong code is
set, no beep sound will be emitted.
NOTE: Press
button within 30 seconds after pressing MODE button.
/
For the function details, refer to Chapter 8-8.
8. Exit the function setting mode by pressing the RESET button.
8-5. Indoor unit (setting by wireless remote controller)
button once to transmit the function setting information. 1 short beep will be emit-
1 short beep
"Function details" on page 183.
RESET
- 170 -
8. Function settings