Motorcycle; Mtc; Abs - KTM 790 ADVENTURE R 2022 Owner's Manual

7.24.21 Motorcycle

7.24.22 MTC

7.24.23 ABS

–
Press the SET button when the menu is closed.
–
Press the UP or DOWN button until Motorcycle is marked. Press
the SET button to open the menu.
In the Motorcycle menu, the motorcycle traction control and the
quickshifter + (optional) can be switched on or off and the ABS
can be configured.
F01805-01
–
Press the SET button when the menu is closed.
–
Press the UP or DOWN button until Motorcycle is marked. Press
the SET button to open the menu.
–
Press the UP or DOWN button until MTC is marked. Press
the SET button to open the submenu.
–
Activate menu item using the UP or DOWN button.
–
Switch MTC on or off by pressing the SET button.
Info
F01806-01
Do not open the throttle when switching on or off.
After the ignition is switched on, motorcycle traction
control is enabled again.
Press and
hold the SET
button for 3 -
5 seconds.
–
Press the SET button when the menu is closed.
–
Press the UP or DOWN button until Motorcycle is marked. Press
the SET button to open the menu.
–
Press the UP or DOWN button until ABS is marked. Press
the SET button to open the submenu.
–
Activate menu item using the UP or DOWN button.
–
Press the SET button to switch off ABS or to select the desired
ABS mode.
F01807-01
Info
During the journey, the ABS mode can be switched, but
not deactivated.
Do not open the throttle during the selection.
The ABS can only be reactivated by switching on the
ignition again.
When the Road ABS mode is active, ABS controls both
wheels.
When the Offroad ABS mode is active, ABS only con-
trols the front wheel. The rear wheel is not controlled by
ABS and may lock during braking maneuvers.
COMBINATION INSTRUMENT 7
Activation of the motorcycle traction control.
47