Table of Contents
Advertisement
Wheel-speed sensor,
front, to fork leg
Thread-locking compound:
micro-encapsulated
8 Nm
Position the lower part of the
front-wheel cover 2.
Install screws 1.
Front-wheel cover to
telescopic fork
Thread-locking compound:
micro-encapsulated
https://www.motorcycle-manual.com/
Front-wheel cover to
telescopic fork
3 Nm
Removing rear wheel
Make sure the ground is level
and firm and place the mo-
torcycle on a suitable auxiliary
stand.
OE
with centre stand
Make sure the ground is level
and firm and place the motor-
cycle on its centre stand.
Press the brake caliper 1
against the brake disc 2.
Brake pistons are pushed back.
Remove screw 3 and remove
the wheel speed sensor from
its bore.
10
215
z
Advertisement
Table of Contents
