Table of Contents
Advertisement
Remove front-wheel stand and
firmly compress front forks sev-
eral times. Do not operate the
brake lever in this process.
Installing the front-wheel stand
(
197).
Install axle screw 2 and tighten
to the specified torque.
Counter-hold quick-release axle
on the right-hand side.
Axle screw in quick-re-
lease axle, front
50 Nm
https://www.motorcycle-manual.com/
Tighten left-hand axle clamp-
ing screws 3 to the specified
torque.
Clamp of quick-release
axle
Tightening sequence: Tighten
screws six times in alternate
sequence
19 Nm
Tighten right-hand axle clamp-
ing screws 1 to torque.
10
213
z
Advertisement
Table of Contents
