Table of Contents
Advertisement
UT219PV User Manual
V. Electrical Symbols
Symbol Description
Do not place equipment and its
accessories in trash. Items must be
properly disposed of in accordance with
local regulations.
AC (Alternating Current)
DC (Direct Current)
Application around and removal from
UNINSULATED HAZARDOUS LIVE
conductors is permitted.
Adopting Bluetooth communication
technology
Conforms to European Union directives
MEASUREMENT CATEGORY III is
applicable to test and measuring circuits
CAT III
connected to the distribution part of the
building's low-voltage MAINS installation.
VI. General Characteristics
Display count: 9999
Polarity indication: Auto
Overload indication: "OL" or "-OL"
Low battery indication: The symbol "
lower than the working voltage. Please replace the batteries with new ones in time.
Position error: An error of ±1.0% will be produced if the measured object is not located at the
center of the clamp jaws.
Drop proof: 1 m
Jaw opening: 35 mm
Power supply: AA 1.5V battery × 2
Auto power off: No operation for about 15 minutes will turn off the Clamp Meter. This function can
be disabled if needed.
Dimensions: 295 mm × 73 mm × 50 mm
Weight: 540g approx.
Operating altitude: 2000 m
Symbol Description
Double insulated
Grounding
Warning
Low battery
Conforms to UL STD 61010-1, 61010-2-032,
61010-031
Certified to CSA STD C22.2 NO. 61010-1,
61010-2-032, 61010-031
MEASUREMENT CATEGORY IV is applicable
to test and measuring circuits connected at
CAT IV
the source of the building's low-voltage
MAINS installation.
" appears on the LCD to indicate the battery voltage is
6 / 27
Advertisement
Table of Contents
