Table of Contents
Advertisement
Service Manual
Important Safety Information
This manual contains information and warnings that the user must follow to ensure safe operation and keep the product
in a safe condition.
General Safety Summary
Use product only as specified. Review the following safety precautions to avoid injury and prevent damage to this
product or any products related to it. Read all instructions carefully. Keep these instructions for future reference.
This product should be used in accordance with local and national regulations.
For proper and safe operation of the product, generally accepted safety procedures must be followed in addition to the
safety precautions stated in this document.
This product is for use by trained personnel only.
Only qualified personnel who are aware of the hazards involved can remove covers for service, maintenance or
adjustments.
Always check products of known origin before use to ensure they are functioning properly.
This product is not intended for the detection of hazardous voltages.
Use personal protective equipment to prevent electric shock and arc blast injuries where hazardous live conductors
are exposed.
While using this product, you may need access to other parts of a larger system. Read the safety sections of the other
component manuals for warnings and cautions related to the operating system.
When integrating this device into a system, the safety of that system is the responsibility of the system assembler.
Avoid Fire or Personal Injury
Use the correct power cord
Use the correct power cord
Use proper voltage settings
Ground the product
Ground the product
Power off
Instruments.uni-trend.com
Use only the power cord specified for this product and certified for the country of
use.
Use only the power source specified for this product and certified for the country
of use. Do not use the supplied power cord with other products.
Before applying power, make sure the line selector is in the correct position for
the power source being used.
This product is grounded through the grounding conductor of the power cord. To
avoid electric shock, the grounding conductor must be grounded. Make sure the
product is properly grounded before connecting to the product's input or output
terminals. Do not disable the power cord ground connection.
This product is indirectly grounded through the grounding conductor of the host
power cord. To avoid electric shock, the grounding conductor must be grounded.
Make sure the product is properly grounded before connecting to the product's
input or output terminals. Do not disable the power cord ground connection.
The power switch disconnects the product from the power source. See location
description. Do not place the device in a location where it is difficult to disconnect
the power switch; it must always be accessible to the user for a quick disconnect
if required.
MSO/UPO3000E Serials products
3 / 27
Advertisement
Table of Contents
