General Technical Specifications - ResMed S9 Escape Information Manual

General technical specifications

90W power supply unit
30W power supply unit
Operating temperature
Operating humidity
Operating altitude
Storage and transport temperature
Storage and transport humidity
Electromagnetic compatibility
Aircraft use
IEC 60601-1 classification
S9 technical specifications
Operating pressure range
Maximum single fault steady state
pressure
Pressure measurement tolerance
Flow measurement tolerance
DECLARED DUAL-NUMBER NOISE EMISSION VALUES in accordance with ISO 4871:
Sound pressure level
6
Input range 100–240V, 50–60Hz,
Nominal for aircraft use 110V, 400Hz
Typical power consumption 70W (80VA)
Maximum power consumption 110W (120VA)
Input range 100–240V, 50–60Hz,
Nominal for aircraft use 110V, 400Hz
Typical power consumption 20W (30VA)
Maximum power consumption 36W (75VA)
41ºF to 95ºF (+5ºC to +35ºC)
10–95% non-condensing
Sea level to 8,500' (2,591 m)
-4ºF to 140ºF (-20ºC to +60ºC)
10–95% non-condensing
Product complies with all applicable electromagnetic
compatibility requirements (EMC) according to IEC60601-1-
2, for residential, commercial, and light industry
environments. Information regarding the electromagnetic
emissions and immunity of these ResMed devices can be
found on www.resmed.com, on the Products page under
Service and Support. Click on the PDF file for your
language.
ResMed confirms that the S9 Series meets the Federal
Aviation Administration (FAA) requirements (RTCA/DO-
160F) for all phases of air travel.
Class II (double insulation), Type BF
4 to 20 cm H O
2
30 cm H O
2
±0.5 cm H O ± 4% of the measured reading
2
±6 L/min or 10% of reading, whichever is greater
24 dBA as measured according to ISO 17510-1:2002
26 dBA with uncertainty of 2 dBA as measured according
to ISO 17510-1:2007