Table of Contents
Advertisement
Operating the Hopper (continued)
1. Position the machine where you intend to
dump the load.
2. Dump the hopper by pushing the switch
forward
3. Lower the hopper by pulling the switch
rearward
Note:
engage auto-return.
To stop the automatic movement, push on the hopper switch in any direction.
After Operation
After Operation Safety
After Operation General Safety
• Engage the parking brake (if applicable), shut off the machine, remove the key, and wait
for all movement to stop before adjusting, cleaning, or repairing the machine.
• Do not touch parts that may be hot from operation. Allow them to cool before attempting
to maintain, adjust, or service the machine.
• Clean debris from drives and the motor to help prevent fires.
Battery and Charger Safety
• WARNING: Risk of fire and electric shock—The batteries have no user-serviceable
parts.
• Confirm the voltage that is available in your country before using the charger.
• Do not get the charger wet; keep it protected from rain and snow.
• A risk of fire, electric shock, or injury may result from using an accessory not
recommended or sold by Toro.
• To reduce risk of a battery explosion, follow these instructions and the instructions for any
equipment that you intend to use near the charger.
• Batteries could emit explosive gasses if they are significantly overcharged.
• Refer to an Authorized Service Dealer to service or replace a battery.
• Never allow children or untrained people to operate or service the charger. Local
regulations may restrict the age of the operator. The owner is responsible for training all
operators and mechanics.
• Never allow children or untrained people to operate or service the charger. Local
regulations may restrict the age of the operator. The owner is responsible for training all
operators and mechanics.
• Keep bystanders and children away while charging.
3465-683A
.
.
Pull the switch rearward twice to
G380321
Page 4–7
Operation: After Operation
Advertisement
Table of Contents
