Supermicro SUPER P6DLE User Manual page 39

Chapter 2: Installation
6. Slide the clips on the supports (A) forward until they click into
place to hold the pegs securely. Apply slight pressure on the peg
and push the peg toward the clip while pushing the clip forward.
Push the latches on the processor (B) outward until they click into
place in the retention mechanism. The latches must be secured for
proper electrical connection of the processor.
7. Attach the small end of the power cable (C) to the three-pin con-
nector on the processor, then attach the large end to the three-pin
connector on the motherboard.
Figure 2-4. Attaching the Power Cable
B
C
A
2-5