Supermicro SUPER P6DLE User Manual page 26

SUPER P6DLS/P6DLE/P6SLS/P6SLA User's Manual
CPU Fan Auto-Off in Sleep Mode
The CPU fan will turn on when the power is on. It can be turned off
when the CPU is in sleep mode. When the CPU is in sleep mode,
it means that it will not run at full power, thereby generating less
heat. For power saving purposes, the user can have the option to
shut down the CPU fan.
CPU Overheat Alarm and Control
This feature is available when used with SUPERMICRO's SUPER
Doctor Utility. The program will generate a beep sound via the
speaker when it detects CPU overheat condition.
condition can be configured by the user. The program can also give
an indication on the screen when the CPU overheats.
Chassis Intrusion Detection
The chassis intrusion circuitry can detect unauthorized intrusion to
the system. The chassis intrusion connector is located on JL1.
Attach a micro-switch to JL1.
means that the chassis has been opened.
alert the user with a warning message when the system is on. The
circuitry uses the on-board battery to power up. Even if the whole
system is powered off, the detection can still work properly.
System Resource Alert
This feature is available when used with Intel LANDesk Client Man-
ager. The user can be notified of certain system events.
ample, if the system is running low on virtual memory, the hard
drive space is not enough to save the data, you are then alerted of
the potential problems.
When the micro-switch is close, it
The circuitry will then
1-18
This overheat
For ex-