SUPER P6DLS/P6DLE/P6SLS/P6SLA User's Manual
2-2 Pentium II Processor Installation
When
handling
!
placing direct pressure on the label area of the fan.
1. Check the Intel boxed processor kit for the following items: the
processor with the fan heatsink attached, two black plastic pegs,
two black plastic supports, and one power cable.
2. Install the retention mechanism attach mount under the
motherboard.
Do this before mounting the motherboard into the
chassis. Do not screw too tight. Mount the two black plastic pegs
onto the motherboard (Figure 2.1).
attach the fan heatsink supports. Notice that one hole and the base
of one peg are larger than the other hole and peg base. Push each
peg into its hole firmly until you hear it "click" into place.
Figure 2-1. Mounting the Pegs
Retention
Mechanism
the
Pentium
II
processor,
These pegs will be used to
Large peg and hole
2-2
avoid