Samsung WD10N84 Series User Manual page 68

Troubleshooting
Code
LC, LC1
Ub
3C
3CP
UC
HC
1C
68 English
Untitled-13 68
Check the drain hose.
• Make sure the end of the drain hose is not placed on the
floor.
• Make sure the drain hose is not clogged.
• If the information code remains, contact a customer service
centre.
Spinning does not work.
• Make sure laundry is spread out evenly.
• Make sure the washing machine is on a flat, stable surface.
• Redistribute the load. If only one item of clothing needs
washing, such as a bathrobe or pair of jeans, the final spin
result might be unsatisfactory, and an "Ub" check message
will be shown in the display.
Check the drum motor for operation.
• Try restarting the cycle.
• If the information code remains, contact a customer service
centre.
Check the pulsator motor for operation.
• Try restarting the cycle.
• If the information code remains, contact a customer service
centre.
The electronic control needs to be checked.
• Check if power is supplied properly.
• If the information code remains, contact a customer service
centre.
Low voltage detected.
• Check if the power cord is plugged in.
• If the information code remains, contact a customer service
centre.
High temperature heating check.
• If the information code remains, contact a customer service
centre.
The Water Level sensor is not working properly.
• Turn the machine off, and restart the cycle.
• If the information code remains, contact a customer service
centre.
Action
2019-06-17 PM 4:35:41