Samsung WD10N84 Series User Manual page 24

Installation
C
24 English
Untitled-13 24
C
D
3. Hold the adaptor and turn part (C) in
the arrow direction to loosen it by 5
mm (*).
4. Insert the adaptor into the water tap,
and tighten the screws while lifting up
the adaptor.
5. Turn part (C) in the arrow direction to
tighten it.
6. While holding down part (D), connect
the water hose to the adaptor. Then,
release part (D). The hose fits into the
adaptor with a clicking sound.
7. If you are using a screw type of water
tap, use the provided screw-type
adaptor to connect to the water tap as
shown.
2019-06-17 PM 4:35:31