Table of Contents
Advertisement
Auto dispense
Detergent
1. To select an input level, press Dose per Wash to cycle through the settings: Less >
Standard > More.
- If you choose More, the rinse process will be added once more.
2. To select a water hardness level, press and hold Dose per Wash to cycle through the
settings: 1 (soft water) > 2 (medium water) > 3 (hard water).
3. When complete, press and hold Dose per Wash for 3 seconds to confirm your changes.
Fabric softener
1. To select an input level, press Dose per Rinse to cycle through the settings: Less >
Standard > More.
2. To select a concentration level, press and hold Dose per Rinse to cycle through the
settings: 1 (Normal) > 2 (x2) > 3 (x3).
3. When complete, press and hold Dose per Rinse for 3 seconds to confirm your changes.
NOTE
• If the
indicator of the Detergent or Softener stays on, refill the corresponding
compartment.
• If you select
However, you can enable the function(s) manually after selecting a cycle.
Untitled-13 47
WOOL the Dose per Wash/Dose per Rinse will be disabled automatically.
English 47
2019-06-17 PM 4:35:37
Advertisement
Table of Contents
