Installation And Service Space - Canon imagePRESS V900 Manual

Canon

4.3 Installation and Service Space

The installation site must provide enough space for unrestricted operation,
maintenance work, and proper ventilation. The machine dimensions are in diagrams
on the following pages. Every attempt should be made to install the equipment in a
room that allows for the proper servicing and maintenance of the equipment, and
ensures that issues, such as ventilation, odors, and dust accumulation are not a
concern.
IMPORTANT
• Keep the back of the machine at least 31.5" (800 mm) away from a wall if the
optional Paper Folding Unit-K1, Multi Function Professional Puncher-C1, or
Document Insertion Unit-R1 is attached.
• Make sure that approximately 39 3/8" (1,000 mm) or more space is left around the
front, left, and right sides of the machine for the proper servicing of the equipment.
• The floor must be level (with no bows) and flat for the stabilization and support of
the machine.
• The machine should not be moved once it is in place.
• The minimum doorway opening that the machine passes through prior to
installation must be at least 32" wide.
• The minimum elevator depth used to transport the machine prior to installation
must be at least 56".
Revision 2 imagePRESS V900/V800/V700 Customer Expectations Document
imagePRESS V900/V800/V700 Customer Expectations Document
Page 49