Table of Contents
Advertisement
Setting
Access Authority
Community Name (Read Only)
Community Name (Read/Write)
Allow access from Epson tools
SNMPv3 Settings
Setting
Enable SNMPv3
User Name
Authentication Settings
Encryption Settings
Context Name
Parent topic:
Configuring SSL/TLS Communication
Follow the instructions in these sections to configure SSL/TLS communication using Web Config.
Configuring SSL/TLS Settings
Configuring a Server Certificate for the Product
Parent topic:
Configuring SSL/TLS Settings
If your product supports HTTPS, you can configure SSL/TLS to encrypt communications with your
product.
1. Access Web Config and select Network Security tab.
2. Select SSL/TLS and select Basic.
3. Select one of the options for the Encryption Strength setting.
4. Select Enable or Disable for the Redirect HTTP to HTTPS setting as necessary.
Options/Description
Set the access authority when SNMPv1/v2c is enabled to
Read Only or Read/Write
Enter 0 to 32 ASCII characters
Enter 0 to 32 ASCII characters
Allow information to be written from Epson tools such as
Epson Device Admin
Options/Description
Enable SNMPv3 for products that support SNMPv3
Enter 1 to 32 characters
Select an algorithm and set a password for authentication
Select an algorithm and set a password for encryption
Enter 1 to 32 characters in Unicode (UTF-8)
Configuring Protocols and Services in Web Config
Using Your Product on a Secure Network
204
Advertisement
Table of Contents
