Ink Pack Safety Instructions - Epson WorkForce Pro WF-M5399 User Manual

Ink Pack Safety Instructions

• Keep ink packs and maintenance boxes out of the reach of children and do not drink the ink.
• Be careful when you handle used ink packs; there may be ink remaining around the ink supply port. If
ink gets on your skin, wash it off with soap and water. If it gets in your eyes, flush them immediately
with water. If discomfort or vision problems continue after a thorough flushing, see a doctor
immediately. If ink gets in your mouth, see a doctor right away.
• Do not put your hand inside the product or touch the ink pack during printing.
• Install a new ink pack immediately after removing the expended one. Leaving the ink pack uninstalled
can dry out the print head and may prevent the product from printing.
• If you need to remove an ink pack temporarily, make sure you protect the ink pack from dirt and dust.
Store the ink pack in the same environment as the printer. Because the ink supply port is equipped
with a valve designed to contain the release of excess ink, there is no need to supply your own covers
or plugs.
• Do not remove or tear the label on the ink pack; this can cause leakage.
• Do not remove the transparent seal from the ink supply area. This may cause the ink pack to become
unusable.
• Do not touch the green IC chip on the side of the handle. This may prevent normal operation.
• Do not shake ink packs too vigorously; otherwise ink may leak.
• Do not drop or knock the ink pack against hard objects; otherwise ink may leak.
• Use an ink pack before the date printed on its package.
• Do not disassemble an ink pack or a maintenance box. Ink may get in your eyes or on your skin.
• Store ink packs in a cool, dark place.
• After bringing an ink pack inside from a cold storage site, allow it to warm up at room temperature for
at least 12 hours before using it.
• Store ink packs with the bottom facing down.
• To help protect your print head, a variable ink safety reserve remains in the ink supply unit when your
printer notifies you to replace the ink pack. The yields quoted for you do not include this reserve.
• You cannot use the ink pack supplied with the product as a replacement ink pack. It must be used for
initial setup.
147