Mounting a single antenna splitter in a rack
To mount the antenna splitter in a rack, you will need the GA 3 rack mount-
ing kit (optional accessory).
To fasten the mounting angle of the GA 3 rack mounting kit:
Unscrew and remove the two recessed head screws (M4x8) on each
▷
side of the antenna splitter.
Secure the mounting angles to the sides of the antenna splitter using
▷
the previously removed recessed head screws.
►
Secure the blanking plate to one of the mounting angles using two re-
▷
cessed head screws (M6x10).
►
Installing the ASA 214
70